UBBPe4 Equipment information & support
Huawei UBBPe4 is a carrier-grade 5G baseband processing board equipped with 6x 10GE/25GE eCPRI optical interfaces, engineered for 100MHz bandwidth Massive MIMO deployments.
Equipment information
- Brand
- Huawei
- Equipment model
- UBBPe4
- Equipment type
- Baseband Units & Processing Boards (BBU)
- Controller / software version
- Confirm against the installed equipment
Information below comes from the current product catalogue. Confirm the controller, software version and configuration of the installed equipment separately.
- Board Function Type
- 5G Ultra-Capacity Baseband Board (UBBPe4)
- Supported RAT Modes
- 5G NR (Sub-6GHz) / LTE TDD / LTE FDD
- Transmission Interfaces
- 6x SFP28/SFP+ (10GE/25GE eCPRI)
- Power Consumption
- Typical 110W (Max 140W)
- Subrack Compatibility
- Huawei BBU3910 / BBU5900 Subrack
- Operating Temperature
- -20°C ~ +55°C
Alarms & troubleshooting
No public alarm guide is available for this model yet
Share the original alarm text and controller version to help identify applicable documentation. Alarm definitions and procedures may vary by version.
Share on-site informationShare on-site information
- 01
Identify the exact model
Record the nameplate, system model and controller or module model.
- 02
Keep the alarm details
Record the full alarm text, indicator colour, timing and whether it persists.
- 03
Describe recent changes
Note recent replacements, software updates or configuration changes.
Record information visible in the existing interface. Electrical measurements, disassembly and replacement should follow the applicable manufacturer's manual and be performed by qualified personnel.
Related technical articles
Browse the technical guides or send a question about this model.
View all articlesNeed a replacement module or supporting equipment?
Confirm the full model, system configuration and compatibility requirements before enquiring about suitable products.
Have a model and an on-site issue?
Share the exact model, alarm text and observed symptoms to help identify relevant information and compatibility requirements.